Washed Stone
Decorative Finishes
This washed stone is also known as floor epoxy resin washed stone, is a building material that combines both decorative and functional properties. Suitable for facades and floors, it meets diverse architectural decorative needs, and its advantages are further enhanced with technological upgrades. Resin washed stone has undergone a major upgrade. The solvent-free facade resin, Decker, offers dual-purpose performance (serving as both a primer and a mixed resin), is odorless, highly weather-resistant, and stable, giving 3-5mm rough stone the appearance of a facade. It exhibits exceptional weather resistance, yellowing resistance, high viscosity, and waterproof properties. Flexible resin washed stone, also known as liquid carpet or resin washed stone, is a premixed flooring material made from a secondary process of environmentally friendly, high-hardness resin. The resin-cast and coated surface is durable, slip-resistant, abrasionresistant, and pollution-resistant, making it extremely comfortable to walk on or stand on.
Washed Stone Parameter
| Property | Solvent-Based (oil-Based) |
| Solid Content | Coarse sand: 100%, Medium sand: 100%, Fine sand: 100% |
| Specific Gravity | Coarse sand: 1.65 kg/L (±0.05) Medium sand: 1.65 kg/L (±0.05) Fine sand: 1.4 kg/L (±0.05) |
| Ratio | Coarse sand : A:B=23.8:0.9:0.3 (20:1) Medium sand : A:B=23.8:0.9:0.3 (20:1) fine sand : A:B=22.6:1.8:0.6 (20:2) |
| Alkali Resistance | 24 Hours Without Blistering Or Shedding |
| Water Resistance | 48 Hours Without Blistering Or Shedding |
| Paint Film Drying (surface Drying) | >12h(25-30°C） |
| Recoat Time/coating Layer | >24h(25-30°C） |
| Drying Time (hardening) | 72h |
Washed Stone Features
1. Natural stone formula, salt and alkali resistant, high temperature resistant, and no fading.
2. High quality/high hardness/high transparency resin, strong film formation.
3. Good waterproofness, can be used in hot springs (can be used in wet areas for a long time), high water resistance.
4. High hardness and adhesion, tensile shear strength ≥6MPa, strong bonding performance of mixed substrates.
5. Good resistance to UV, acid and alkali, and yellowing, with a service life of more than 10 years.
6. Super strong adhesion, high compressive strength, environmental protection, oil resistance and acid and alkali resistance.
Specially designed for dry/wet area floor systems. Suitable for concrete bases, indoor and outdoor swimming pools, garden fish ponds, and artistic decorative walls. It can be used as a supporting resin for facades and mixed with stone.
Washed Stone Construction Guidelines
1. Ensure that the surface of the substrate is clean, free of dust and oil stains, and loose parts need to be removed.
2. Mix component A and component B of the water-washed stone epoxy primer at a ratio of 3:1, stir well, and apply one coat by roller.
3. Mix the base material A and B of the water-washed stone (coarse sand as an example) in a ratio of 23.8:0.9:0.3 (20:1) and stir evenly. Then add the water-washed stone sand and stir evenly. After the epoxy primer on the ground is completely dry, lay the water-washed stone on the ground, spread it out with a trowel, smooth it, and pay attention to exposing the base material and the flatness.
4. Mix component A and component B of the two-component epoxy topcoat at a ratio of 3:1 until thoroughly mixed. After the washed stone floor is completely dry, apply one coat of the mixture. Note that the seasonings should not be mixed with water during the construction process. After the construction is completed, the tools should not be cleaned with water, but should be cleaned with a thinner.
