Tile Adhesive
Waterproofing Systems
This product is made from modified polymer emulsion. It is ready to use straight from the container, requiring no mixing. Applied to the back of tiles, it quickly penetrates and forms a tough interface layer, significantly improving the adhesion between the tile and cement mortar. It effectively solves the problems of hollow spots and detachment after laying vitrified tiles and low-absorption tiles. The product has a green and environmentally friendly water-based formula, is easy to apply, and is a dedicated auxiliary material for modern tile laying.
Tile Adhesive Parameter
| Appearance | Milky White, Semi-Transparent, Homogeneous Liquid |
| Solid Content | 35-40% |
| Proportion | 1.02-1.05 |
| PH | 8.5-9.5 |
| Viscosity (KU, 25℃) | 90-110 |
| Alkali Resistance | No Bubbling, No Peeling |
| Water Resistance | No Bubbling, No Peeling |
| Low Temperature Stability | No Abnormalities |
| Coating Temperature Resistance | No Cracking Or Peeling After 3 Cycles |
| Paint Film Drying (surface Drying) | ≤4H |
| Recoat Time/coating Layer | ≥24H |
| Drying Time (hardening) | ≥72H" |
Tile Adhesive Features
1. Strong adhesion and anti-detachment: After curing, the high-molecular polymer forms mechanical interlocking and chemical bonding, resulting in high adhesion strength and completely eliminating the risk of hollowing and falling off vitrified tiles and large-format ceramic tiles.
2. Water-based, environmentally friendly, and odorless: It uses a pure water-based formula, contains no harmful substances such as benzene and formaldehyde, has low VOC emissions, meets national environmental protection standards, and is safe and non-irritating during construction.
3. Penetration, locking, and aging resistance: Excellent permeability allows it to penetrate deep into the micropores of ceramic tiles to form a locking structure. It is water-resistant, alkali-resistant, and aging-resistant, maintaining strong adhesion even under temperature changes.
4. Ready to use and easy to apply: Single-component design, simply open the lid and stir evenly before use, no complicated mixing required, can be applied with a roller or brush, even beginners can operate without pressure.
5. Wide compatibility and applicability: It is highly compatible with various bonding materials such as cement mortar and tile adhesive, and can be used on the back of various high-density ceramic tiles such as vitrified tiles, antique tiles, and marble.
Suitable for the back surface treatment of vitrified tiles, fully polished glazed tiles, antique tiles, marble, and large-sized ceramic tiles with low water absorption rate for indoor walls. It needs to be used in conjunction with cement mortar or tile adhesive.
Tile Adhesive Construction Guidelines
1. Tile back cleaning: Remove dust, oil, and release agent from the back of the tiles, keeping them clean, firm, and free of water. Trim any protruding edges or corners with a putty knife, ensuring even application of the adhesive to improve bonding strength.
2. Adhesive roller coating: Thoroughly mix the adhesive and apply it to the back of the brick in a cross pattern using a wool roller, ensuring full coverage without any missed spots or accumulated adhesive, forming a uniform thin layer without exposing the base material.
3. Installation process: Wait 1-3 hours until the adhesive on the back is dry and glossy (adjust the time according to temperature and humidity), apply tile adhesive or mortar to the back of the tile, press and smooth it on the wall to complete the installation.
